Primers
Primer speeds cure of Anaerobic adhesives particularly in cold conditions and on less active surfaces such as cadmium and zinc.
Both grade N and T are available in solvent as well as solventless form.
Grade N and T
|
|
Solventless primer T and N
|
ขนาดบรรจุต่างๆ
|
จำนวน (ชิ้น/กล่อง)
|
1.75 oz Bottle
|
10
|
4.25 oz Aerosol
|
12
|
Gallon Can
|
1
|
|
|
ขนาดบรรจุต่างๆ
|
จำนวน (ชิ้น/กล่อง)
|
1 oz Bottle
|
10
|
Liter Bottle
|
1
|
|
|
Cleaners
Proper surface preparation will generally improve bond strength. Removal of surface dirt may even require mechanical abrasion.
Solvent-degreasers may also be necessary to remove residual surface film form the manufacturing process. SAF-T-LOK offers a variety of cleaners for ultimate performance.
ขนาดบรรจุต่างๆ
|
จำนวน (ชิ้น/กล่อง)
|
11 oz/16 oz
Aerosol Can
|
12
|
Gallon Can
|
1
|
|
Accelerators
Accelerators speed the cure and increase the gap filling of Instant Bonders. Within a few seconds cure is complete.
ขนาดบรรจุต่างๆ
|
จำนวน (ชิ้น/กล่อง)
|
1.75 oz Bottle
|
10
|
Gallon Can
|
1
|
|
Surface Conditioner
Surface ionization pretreatment is necessary to affect best results with instant bonders on non-polar plastic surfaces such as polyethylene or polypropylene. SAF-T-LOK® Surface Conditioner does the job.
ขนาดบรรจุต่างๆ
|
จำนวน (ชิ้น/กล่อง)
|
4.0 oz Can
|
6
|
|
Debond
After an Instant Bonder has been used and removal or repositioning is necessary, immersion for a few minutes in Debond will soften the adhesive and allow removal.
ขนาดบรรจุต่างๆ
|
จำนวน (ชิ้น/กล่อง)
|
1.75 oz Bottle
|
10
|
Gallon Can
|
1
|
|
Activators
Activators are the second cure component of Structural Adhesives and within a few minutes of assembly parts reach fixture strength.
ขนาดบรรจุต่างๆ
|
จำนวน (ชิ้น/กล่อง)
|
1.75 oz
Bottle/wBrush
|
10
|
Pint Can
|
2
|
|
Maintenance Kits
A selection of kits for recurring tasks are available including: Wire tacking, Bearing Mounting, "o" Ring Splicing, and Gasketing. See schedule for items included.
|