Contact-Clean
is an HCFC solvent designed to remove carbon deposits, grease, oil and excess corrosion on electrical equipment. After cleaning, check and oil parts that need lubrication. Eliminates noise caused by dust and dirt.
|
|
รายละเอียด
|
|
|
11 oz Fill/16 oz Can,
12 ชิ้น/กล่อง |
|
Silicone-Lube
is a high temperature lubricant produced from quality silicone fluids to perform where hydrocarbon oils vaporize. it does not gum up after exposure as hydrocarbons do. It provides tack free lubrication from -60F t0 +500F. Silicone is clean to use, odorless, and meets the requirements of FDA/USDA.
|
|
รายละเอียด
|
|
|
9 oz Fill/16 oz Can,
12 ชิ้น/กล่อง |
|
Dry-Moly
is a lubricant system that air dries and bonds molybdenum disulfide particles for extreme pressure service.
|
|
รายละเอียด
|
|
|
12 oz Fill/16 oz Can,
12 ชิ้น/กล่อง |
|
Gasket-Off
is compounded from methylene chloride with hydrocarbon thickeners and propellants which disperse as a foamy white cream to remove baked-on gaskets, gasket cement, carbon deposits, dried oils, greases, and paint from metal in 10 minutes. Not recommended on some plastics.
|
รายละเอียด |
|
14 oz Fill/16 oz Can,
12 ชิ้น/กล่อง |
|
T-Gel Lube
is a transparent penetrant with long lasting Teflon lubricating properties that is resistant to water washout.
|
|
รายละเอียด
|
|
|
10 oz Fill/16 oz Can,
12 ชิ้น/กล่อง |
|
Belt-Dress
is formulated to meet industrial demand for increased operating efficiency and longer belt life. It reduces stiffness and restores flexibility to worn and checked belts.
|
|
รายละเอียด
|
|
|
9 oz Fill/16 oz Can,
12 ชิ้น/กล่อง |
|
Pen-Oil
is a hydrocarbon based compound formulated with low surface tension to allow it to penetrate accumulated grease and grit deposits as well as rust and other forms of corrosion to permit easy disassembly of parts. It clings to metal and forms a protective film against rust and other corrosion.
|
|
รายละเอียด
|
|
|
12 oz Fill/16 oz Can,
12 ชิ้น/กล่อง |
|
